Leadermac Smartmac 518S

by Leadermac

$0.00

SKU

Quantity

***LEADERMAC* *Model LMC 518S Smartmac***

7”(8” optional) 5 Head Moulder

Specifications
Thickness Material	.4”(to 1/4” optional) to 5”
Width Material	.6” to 7” (8” optional)
Min length of material	8” (Butt fed)
Axial adjust. side heads	.8” (20mm)
Axial adjust. top/btm heads	.8” (20mm)
Feed Speeds to	20-85 FPM (6-24 MPM)
Net weight approx.	8,200 lbs.

DRIVE SYSTEM

Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
Powered rise and fall to extra heavy feed support beam by 1 hp/.75 kw
Upper support Beam is on large center column for the most rigid upper beam
All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme
6 Top Driven Feed Roll Assemblies (each equipped with Multiple 2” wide rolls that can be quickly spaced/positioned or removed as desired)
2 Full Width Driven Bottom Feed Rolls
Top & Bottom rolls – before first bottom head
Full Width Bottom Driven Infeed Roll
Top/Bottom Full Width Powered Outfeed Rolls
Top Infeed Rolls with pneumatic rise and fall by switch
Centrally located Pneumatic Pressure Gauges & Controls on Exterior Column
All Top Rolls are Pneumatically Tensioned. There are 3 different pressurized groups to the Top Rolls. Infeed, Midfeed & Outfeed Top Rolls. Each group has a pressure gauge and regulator for varying pressure setting.
Top Infeed driven serrated Steel feed rolls up to top head are hardened and satin chromed to resist wear and prevent chips and shavings from sticking to them
Polyurethane top feed rolls after top head
Intermediate short stock top driven feed roll station with pneumatic pressure for feeding minimum 8”(200mm) length work pieces. It is easily flipped up for rear side head
Jog Forward & Jog Reverse to feed with duplicate remote located along the front of the moulder for fast and easy control – Remote includes Beam Up/Down
Feed roll diameter 5.5” / 140mm
5 HP VFD Variable Speed Drive from 20-80 FPM with Digital Speed Readout (can actually run faster if desired)

SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING

All Heads are Standard 6000RPM (7200 rpm optional) and belt driven
40mm diameter spindles (1 ½”, 1 13/16” or 50 mm – Optional)
Spindles are manufactured from SCM-440 tool steel (from Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with 2 pairs of Duplex SKF precision high speed Bearings to provide the best cutting stability and accuracy. Spindle Tolerance guaranteed to +/-0.002mm / 0.00007” accuracy. They are permanent grease lubed and are sealed
Adjustment of all spindles from front – Easy to operate stations
All spindles have horizontal and vertical adjustment,
Vertical Spindle – Axial (Vertical) Adjustment – .8”
Horizontal Spindle – Axial (Horizontal) Adjustment - .8”
Independent manual vertical adjustment to top head.
Siko Dual Counters on Near Side Head & Top Head Radial Adjustment for Quick Setup
All Spindle Axis(Vertical & Horizontal) throughout the Moulder that don’t have Setworks or Dual Siko Counters have Mechanical Position Readouts for Radial & Axial (vertical & horizontal), fast and accurate setting (except 1st Bottom Axial)
Readouts in Inch
1st Bottom Head supplied with Spiral Carbide Cutterhead
+ Set (of 4) Cutterheads Included, serrated back dual angle 12° / 20°

	HEAD HP	CUTTERHEAD SWING	HOOD SIZE
1) Bottom Head	7.5 HP	5” to 6.3”(125 – 160 mm)	4.9” (125 mm)
2 & 3) Right Side/Left Side Heads	15 HP	4” to 7” (100 – 180 mm)	4.9” (125 mm)
4) Top Head	15 HP	4” to 8” (100 – 200 mm)	4.9” (125 mm)
5) 2nd Bottom Head	10 HP	4” to 8” (100 – 200 mm)	4.9” (125 mm)

Leadermac Smartmac 518S

LEADERMAC Model LMC 518S Smartmac

7”(8” optional) 5 Head Moulder

***LEADERMAC* *Model LMC 518S Smartmac***

Refine

Collection

Leadermac

Leadermac Smartmac 518S

Leadermac

Sign Up For Newsletters

Be the First to Know. Sign up for newsletter today !