Castle

The TSM-12 pocket cutter machine is one of Castle's bench top models. The TSM-12 routs the 6 degree, low-angle Castle Pocket with no tear out in le...

Video Our best selling pocket hole machine the TSM-22 clamps the stock, routs a pocket and drills a pilot hole with a tap of the foot pedal. The ...

The TSM-31 pocket cutter machine cuts the same patented six degree Castle Pocket as the TSM-22. This machine is designed for continuous production ...

The Three-Phase Pocket Cutter Machine TSM-35 cuts the same patented six degree Castle Pocket as the TSM-21.This machine is designed for continuous ...

With the patented Screw-In-Pocket (SIP) technology, CSI-1.5D cuts Castle’s distinctive, low-angle screw pocket, drills a low-angle pilot hole and i...

Our Face Frame Assembly Table clamping arm glides smoothly on an open beam that allows face frames to extend beyond the top of the table. The rede...

The AT Race 4' x 12' Open-Back Face Frame Assembly Table features clamping arms that glide smoothly on an open beam.  This allows assembly of large...

Call for Availability and Best LTL Shipping Rate This woodworking assembly table replacement arm fits the R200 Ritter Table. This package converts ...

The ASG H-series direct drive pneumatic screwdriver is value engineered to offer affordable productivity. H-Series tools are reversible and feature...

The Castle solid carbide woodworking router bit is your best bet for long-lasting, consistent performance. This bit is exceptional in routing all m...

The Castle Solid Carbide Reverse Helix router bit is suggested for use when other Castle bits cause chip-out, especially in plywood and melamine. T...

The Castle Cobalt High Speed Steel 4 flute bit works well routing most solid woods. (If you work with dense hardwoods such as hickory, you will wan...

Solid Carbide 5mm Line Boring Bit TECHNICAL SPECIFICATIONS -    5mm Boring Bit -    Solid Carbide Weight: 0.03 lbs. Width: 0.25" Height: 2.00" Dep...

The Castle woodworking 5/32” Drill Bit is the perfect fit when you would like a larger hole than our 9/64” bit can provide. This bit works well on ...

The Castle woodworking 1/8” Split Point Drill Bit is a great fit when our 9/64” drill bit is a little too large but the 7/64” bit is too small for ...

Manufactured using the same specifications as our standard 9/64" Brad And Spur point drill bit, our Premium Woodworking Drill Bit is titanium nitri...

Manufactured using the same specifications as our standard 9/64" Split Point drill bit, this premium version is titanium nitride (TiN) coated, addi...

The Castle woodworking 3/16” drill bit is a split point bit. It is best used with a No.8 screw in softer materials such as melamine or pine. Used w...

The Castle woodworking 7/64” drill bit is a split point bit. Use this bit when you desire a snug fit with a No.7 screw that requires a driver for s...

This is the most popular Castle Woodworking Drill Bit. The Brad And Spur tip tracks well in all types of materials and is recommended for use with ...

The Castle 9/64" Split Point woodworking drill bit works on all materials, but is most useful useful when drilling along an extremely tough grain p...

B00622 - #2 Robertson Square Driver Bit, 6" Shank TECHNICAL SPECIFICATIONS - #2 Robertson Square Driver Bit - 6" Shank   Weight: 0.10 lbs. Width: 0...