Lamello Divario P-18, Slide-in Connectors

Divario P-18 Self-Clamping, Invisible Connectors for Slide Insertion Between two fixed sides or shelves into Grooved Channels for Material Thicknesses of 19mm+

*Divario P-18 Connectors do not come with the required Divario P-18 Installation Tool and must be purchased separately*

With the Divario, shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint is able to carry high tensile forces. With this new connector, the user has greater flexibility in design without having to sacrifice stability.

Neither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation or assembly. The connector can be fully or only partially fitted on site. Moreover, the fitting is detachable for transportation.

The P-System groove for the fitting can either be created using CNC technology or very simply by hand using the Zeta P2 biscuit jointer from Lamello.

Description

• Joins and clamps during insertion for perfectly closed joints
• Insertion of shelves after transport for lower transport weight
• Efficient machining and installation with a CNC or a Zeta based on the P-System
• Narrow element for use in shelves for at least 19mm thickness

Benefits

• Completely invisible joint for highest quality standards
• Joins and clamps during insertion for perfectly closed joints
• Efficient machining and installation with a CNC or a Zeta based on the P-system
• Narrow element for the use in shelves with a minimum thickness of 19mm
• No resistance while inserting until shortly before building the clamping force
• Insertion of shelves after transport for lower transport weight
• Connectors insert by hand or install by hammer or mallet
• Drilling into the surface possible with a CNC machine without angle aggregates (nesting machines)
• Machining in possible in the factory or on sit with a CNC or a Zeta P2
• High tensile strength
• No clamps necessary
• Assembly of the complete piece on site possible (flat pack)
• Insertion of the shelves without glue or clamping aids
• Detachable for transport

Applications

• Furniture
• Interior design
• Shop fitting
• Exhibitions
• Book shelves
• Open room dividers
• Wine shelves, etc.

Technical Specifications

Lamello P-System Brochure