Lamello Bisco P-14/P-10, Aligning Elements

Bisco P is an alignment element that is part of the Clamex P system. It is easily installed using the Zeta P2 or CNC as it fits easily into the P-system groove without changing the cutter. Bisco P-10/P-14 is a 7mm thick, made of plastic and used in combination with the Clamex P-14 and is also available for use with the Clamex P-10. The Bisco P-10 is also available for use with Clamex P-10.  The element is not only used for alignment for panels but can be used for gluing, and increasing shear strength. Sizes Bisco P-14: 65 x 27 x 7mm Bisco P-10: 52 x 19 x 7mm Description The Bisco P-14 is a 7mm thick plastic element that is part of the Clamex P system The aligning element is used for the flush alignment of panels, as well as for glueing, stiffening and increasing shear strength Also good for dry-fitting connections prior to final assembly with Clamex or Tenso. Fits P-System grooves without changing the cutter Installation with Zeta P2 or CNC machine Benefits Fits the same P-System groove as Clamex P-14, Tenso P-14, or Clamex P-10 thus removing the need to change cutters Self-clamping in the groove due to its surface structure Fixed connections possible in conjunction with PVA glue Minimal installation depth for material thickness of at least 16mm Lateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine Applications Alignment of grooves on separation walls, table tops or kitchen worktops Combination with Clamex P-14 / Clamex P-10 for detachable surface, corner or mitre joints ranging from 30-180° Combination with Clamex P-14 / Clamex P-10 or as a simple element for gluing work pieces Stiffening or raising shear strength Bisco P-14 / Bisco P-10 is used in combination with Clamex P-14, Tenso P-14 or Clamex P-10 as a cost-effective solution when clamping force is only required from every second fitting and the use of more affordable aligning elements in between to maintain flush grooves is sufficient as an alternative. Advantages Aligning the workpieces The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters. A complement for the Clamex P and Tenso P Ideal for dry connections or when it has not yet been defined whether the parts will be glued or should be detachable. Technical Data Size Bisco P- 14: 65 x 27 x 7 mmBisco P-10: 52 x 19 x 7 mm Cutter ø 100.4 x 7 x 22 Material Plastic Installation tolerance Longitudinal ± 2 mm Video