Click or scroll to zoom
Tap or pinch to zoom
Leadermac Smartmac 518S
Click or scroll to zoom
Tap or pinch to zoom
Leadermac Smartmac 518S
Leadermac Smartmac 518S

Leadermac Smartmac 518S

by Leadermac
SKU

Or call: 847-526-1411

 More payment options

LEADERMAC Model LMC 518S Smartmac

7”(8” optional) 5 Head Moulder

 

Specifications  
Thickness Material .4”(to 1/4” optional) to 5”
Width Material .6” to 7” (8” optional)
Min length of material 8” (Butt fed) 
Axial adjust. side heads .8” (20mm) 
Axial adjust. top/btm heads .8” (20mm) 
Feed Speeds to 20-85 FPM (6-24 MPM)
Net weight approx. 8,200 lbs.

 

DRIVE SYSTEM

  • Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station
  • Powered rise and fall to extra heavy feed support beam by 1 hp/.75 kw
  • Upper support Beam is on large center column for the most rigid upper beam
  • All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme
  • 6 Top Driven Feed Roll Assemblies (each equipped with Multiple 2” wide rolls that can be quickly spaced/positioned or removed as desired)
  • 2 Full Width Driven Bottom Feed Rolls
  • Top & Bottom rolls – before first bottom head
  • Full Width Bottom Driven Infeed Roll
  • Top/Bottom Full Width Powered Outfeed Rolls
  • Top Infeed Rolls with pneumatic rise and fall by switch
  • Centrally located Pneumatic Pressure Gauges & Controls on Exterior Column
  • All Top Rolls are Pneumatically Tensioned. There are 3 different pressurized groups to the Top Rolls. Infeed, Midfeed & Outfeed Top Rolls. Each group has a pressure gauge and regulator for varying pressure setting.
  • Top Infeed driven serrated Steel feed rolls up to top head are hardened and satin chromed to resist wear and prevent chips and shavings from sticking to them
  • Polyurethane top feed rolls after top head
  • Intermediate short stock top driven feed roll station with pneumatic pressure for feeding minimum 8”(200mm) length work pieces. It is easily flipped up for rear side head
  • Jog Forward & Jog Reverse to feed with duplicate remote located along the front of the moulder for fast and easy control – Remote includes Beam Up/Down
  • Feed roll diameter 5.5” / 140mm
  • 5 HP VFD Variable Speed Drive from 20-80 FPM with Digital Speed Readout (can actually run faster if desired)

SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING

  • All Heads are Standard 6000RPM (7200 rpm optional) and belt driven
  • 40mm diameter spindles (1 ½”, 1 13/16” or 50 mm – Optional)
  • Spindles are manufactured from SCM-440 tool steel (from Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with 2 pairs of Duplex SKF precision high speed Bearings to provide the best cutting stability and accuracy. Spindle Tolerance guaranteed to +/-0.002mm / 0.00007” accuracy. They are permanent grease lubed and are sealed
  • Adjustment of all spindles from front – Easy to operate stations
  • All spindles have horizontal and vertical adjustment,
  • Vertical Spindle – Axial (Vertical) Adjustment – .8”
  • Horizontal Spindle – Axial (Horizontal) Adjustment - .8”
  • Independent manual vertical adjustment to top head.
  • Siko Dual Counters on Near Side Head & Top Head Radial Adjustment for Quick Setup
  • All Spindle Axis(Vertical & Horizontal) throughout the Moulder that don’t have Setworks or Dual Siko Counters have Mechanical Position Readouts for Radial & Axial (vertical & horizontal), fast and accurate setting (except 1st Bottom Axial)
  • Readouts in Inch
  • 1st Bottom Head supplied with Spiral Carbide Cutterhead
  • + Set (of 4) Cutterheads Included, serrated back dual angle 12° / 20°

 

  HEAD HP CUTTERHEAD SWING HOOD SIZE
1) Bottom Head 7.5 HP 5” to 6.3”(125 – 160 mm) 4.9” (125 mm)
2 & 3) Right Side/Left Side Heads 15 HP 4” to 7” (100 – 180 mm) 4.9” (125 mm)
4) Top Head 15 HP 4” to 8” (100 – 200 mm) 4.9” (125 mm)
5) 2nd Bottom Head 10 HP 4” to 8” (100 – 200 mm) 4.9” (125 mm)

 

 

Powered by Top Rated Local®