SCM Nova SI 400EP Sliding Table Saw, INCLUDES FREIGHT

The Nova SI 400EP is a versatile sliding table saw with a 16” blade capacity that can be used for breaking down large panels as well as cutting smaller components. This machine has an incredible stroke of 10.5ft (126"). The programmable overhead Ready 3 Axis controller regulates the blade height, tilt, and rip fence positioning with maximum accuracy. Both large and small shops can benefit from this versatile performer.

3-phase, 10.5' sliding table saw with 15 horsepower, powered-movement of the main blade (up/down/tilt) and rip fence with a manual scoring blade.

**$3,200.00 Installation Required, Freight Included**

Wider Sliding Table
The Nova SI 400EP has a new, wider, sliding table with two channels for added versatility. This is a feature normally only found on our larger machines. The hardened steel guideways are machined into place (no glue) and are designed to last the life of the machine with no adjustments needed.

Three Saw Speeds
The Nova SI 400EP has three saw blades speeds standard. The speeds are changed from the top of the machine. Easily access the pulley behind the blade for simple adjustment. This makes this slider much more versatile when cutting numerous types of materials.

“Ready 3 UP” Electronic Control
Programming capacity of saw blade lifting, tilting and rip fence positioning via the overhead controller. Memory capacity up to 99 programs.

Programmable Rip Fence and Main Blade Movement
The Nova SI 400EP uses the “Ready 3 UP” three axes programmer. This controls the programmable rip fence, raising and
lowering of the main blade and the tilt angle. It also has the following features:
- 3-axis electronic control for saw blade lifting and tilting, and powered rip fence, selectable by means of numerical keyboard and displayed on electronic digital readouts
- Memory capacity up to 99 working programs
- Fence position changes automatically when inputting the blade width
- Automatic blade height and rip fence compensation in relation to the blade angle
- 3 Modes of operation: Jog (push button control), Semi-Automatic (individual input of specific axis position), and Automatic (preprogrammed)
- Digital readouts for all axis positions
- Hour of operation meter
- Inch or Metric operation
- Calculator

Blade Group Trunnion for Pivoting
The double trunnion assembly for the blade tilting is part of the blade group casting. This eliminates the possibility of misalignment which exists when these parts are bolted in the place as some manufacturers do. Others used a small pivot pin to hold up the saw group. Direct shaft drive coupled with rack and pinion gearing allows smooth, angle adjustment of the saw blade.

E-Z Dial Scoring Set
Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. This system eliminates the need for shims and the constant adjustment they require. It is fully adjustable in 0.1mm increments.

Squaring Fence
The squaring frame is made of heavy-duty steel and is engineered to provide maximum support for large panels. The Nova SI 400EP comes with both metric and standard scale in addition to a telescopic aluminum fence with two flip stops.